71M6515H
A Maxim Integrated Products Brand
Energy Meter IC
DATA SHEET
JULY 2011
LSB =
450 . 76 ? 10 ? 6 VMAX
SUM _ CYCLES
V rms
Example: A meter designed with VMAX=600V and IMAX=208A is supposed to apply an overvoltage
threshold of 520V (RMS) and an over-current threshold of 400A (RMS). Which values are to be selected for
V_PTHRESHOLD and I_PTHRESHOLD ?
V _ PTHRESHOLD =
520
LSB
=
520
450 . 76 ? 10 ? 6 600
= 14 , 893
SUM _ CYCLES
I _ PTHRESHOLD =
400
LSB
=
400
450 . 76 ? 10 ? 6 208
= 33 , 046
SUM _ CYCLES
Registers Controlling Time and RTC Functions
OP_TIME (0x1E)
This register holds the operating time expressed in 1/100 hours. The register will be reset to zero whenever the host writes
time or date to the RTC.
RTC_DATE (0x20)
This register holds the date information provided by the RTC. The register can be written to in order to set the date.
Bits 15-8: These bits contain the year information (0 to 255). The value 0 represents the year 2000.
Bits 23-16: These bits contain the month information (01 to 12). The value 01 represents January.
Bits 31-24: These bits contain the day of month information (01 to 31).
RTC_TIME_DAY (0x1F)
This register holds the time and day information provided by the RTC. The register can be written to in order to set the
time.
Bits 7-0: These bits contain the day of the week (01 to 07). The value 01 represents Sunday.
Bits 15-8: These bits contain the hour information (00 to 23). The value 00 represents midnight.
Bits 23-16: These bits contain the minutes information (00 to 59).
Bits 31-24: These bits contain the seconds information (00 to 59).
Example : The value 200835 is read from the OP_TIME register. This means that the meter has been running
since the last reset or power-up for
t = 800850/100h = 8008.50h or 8,008h and 30 minutes (333.6875 days or 333 days and 16.5h).
Registers Used for Test Functions
RTM (0x21)
This register controls the Real-Time Monitor. When the RTM_EN bit in the CONFIG register is set, the values of CE RAM
locations specified with the RTM register can be routed to the TMUX pin as a serial data stream. The TMUX bits in the
CONFIG register must be set to 3 in order to select the RTM output for the TMUX pin.
Bits 7-0: These bits ( RTM3 ) select the CE address for RTM3.
Page: 48 of 60
? 2005 ? 2011 Teridian Semiconductor Corporation
1.6
相关PDF资料
71M6521BE-IGTR/F IC ENERGY METER 8K FLASH 64-LQFP
71M6533G-IGTR/F IC ENERGY METER 3PH 100LQFP
71M6543F-IGT/F IC ENERGY METERING
71M6545-IGT/F IC ENERGY METERING
720-10007-00300 CBL D-SUB 9PIN FMAL-25PIN FML 3M
720-10010-00025 CBL DSUB 9PIN FML-25PIN MAL .25M
720-10020-00300 CBL DSUB 9PIN FML-9PIN MALE 3M
720-10021-00300 CBL DSUB 9PIN FML-9PIN FEMAL 3M
相关代理商/技术参数
71M6515H-IGTR 制造商:Maxim Integrated Products 功能描述:71M6515H-IGT - T/REEL - Tape and Reel 制造商:Maxim Integrated Products 功能描述:Metering Systems on a Chip - SoC Energy Meter IC
71M6515H-IGTR/F 功能描述:计量片上系统 - SoC Energy Meter IC RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel
71M6515H-IGTW/F 功能描述:计量片上系统 - SoC Energy Meter IC RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel
71M6515H-IGTW1 制造商:TERIDIAN 制造商全称:TERIDIAN 功能描述:Up to 10ppmC precision ultra-stable voltage reference Digital temperature compensation
71M6515H-IGTWR1 制造商:TERIDIAN 制造商全称:TERIDIAN 功能描述:Up to 10ppmC precision ultra-stable voltage reference Digital temperature compensation
71M6521BE 制造商:TERIDIAN 制造商全称:TERIDIAN 功能描述:Energy Meter IC
71M6521BE-DB 制造商:Maxim Integrated Products 功能描述:Development Boards & Kits - 8051 71M6521BE Demo Brd
71M6521BE-IGT/F 功能描述:计量片上系统 - SoC Residential Energy Meter IC RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel